ASSRA Forum › General › General Discussion › ceramic media
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic ceramic media (Read 3358 times)
pcctex
Participating Member
*
Offline



Posts: 14
Joined: Nov 17th, 2005
ceramic media
Jul 4th, 2006 at 3:41pm
Print Post  
I used ceramic media in my Thumbler's tumbler to clean 32-40 Everlasting cases...the same size media I use to clean 45-70 cases.  It was a huge mistake.  It took me hours to get all the ceramic pieces wedged inside the 32-40 cases out.

Is there a ceramic media available that is sized to use with 32-40 cases?  I will simply leave my cases dark (I shoot black powder) rather than go through that again.

Thanks for any help.
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4164
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: ceramic media
Reply #1 - Jul 4th, 2006 at 4:17pm
Print Post  
I had the same problem when I reviewed the ceramic media.  I would suggest that you might want to try the chemical cleaner that I mentioned in a review about a year ago.  I'll look it up if you can't find it.  I found that if I use corncob media in a vibratory tumbler AFTER I clean the brass chemically, I get pretty good results.  YMMV!

Froggie
  
Back to top
 
IP Logged
 
Jubilado
Full Member
***
Offline



Posts: 123
Location: Nebraska
Joined: Nov 14th, 2005
Re: ceramic media
Reply #2 - Jul 4th, 2006 at 7:55pm
Print Post  
Dave Maurer (Shooter 2) now sells a smaller sized ceramic media for bottle necked cases. (517) 669-9801.

Paul
  
Back to top
 
IP Logged
 
MartiniBelgian
Frequent Elocutionist
*****
Offline



Posts: 1734
Location: Aarschot
Joined: Jun 7th, 2004
Re: ceramic media
Reply #3 - Jul 5th, 2006 at 2:53am
Print Post  
FWIW,
I now use an ultrasonic cleaner, with a weak citric acid/detergent solution - works quite well, even on BP cases.  No need to handle cases individually, and the cases are clean inside out.  Afterwards a rinse, 10 mins in a tumbler with walnut media (to dry) - finished.
  
Back to top
WWW  
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7728
Location: Virginia
Joined: Apr 23rd, 2004
Re: ceramic media
Reply #4 - Jul 5th, 2006 at 8:54am
Print Post  
I use plain Walnut media and it cleans BP case perfectly. Takes some time but the finish is as good as it could be.   32/40 works as well as larger cases I do wash them first in a jug with some dishwashing soap and vinegar.  A the range and soon after they have been fired drop them into a plastic bottle and shake,  I don't wash each one seperatly.

Boats
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7956 seconds.