ASSRA Forum - Scope mounts for Browning BPCR

ASSRA Forum › General › General Discussion › Scope mounts for Browning BPCR

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Scope mounts for Browning BPCR (Read 2702 times)

sakoman Senior Forum Member Offline Posts: 282 Location: Phoenix, AZ Joined: Feb 20^th, 2006	Scope mounts for Browning BPCR May 17^th, 2006 at 1:06am	Print Post
	I just got a Browning BPCR and want to mount an internal adjustment scope to aid in load development. Anyone know what type works best? Thanks, Allen


	YIM AIM IP Logged

QuestionableMaynard8130 Frequent Elocutionist Offline Posts: 4144 Location: Benton Harbor MI Joined: Apr 17^th, 2004	Re: Scope mounts for Browning BPCR Reply #1 - May 17^th, 2006 at 8:03am	Print Post
	Allen, several issues back Dale McGee had one of his Competition Corner columns dedicated to mounting modern internal adjust scopes to single shots. right off the top of my head I don;t recall which issue it was but it should help you. are the BPCRs already tapped for scope mounts? If so it might be for standard weaver bases. You might also need to factor the cartridge/recoil into your planning.

	sacred cows make the best burger
	IP Logged

Dale53 Oldtimer Offline Posts: 810 Location: Southwestern Ohio Joined: Apr 17^th, 2004	Re: Scope mounts for Browning BPCR Reply #2 - May 18^th, 2006 at 1:34am	Print Post
	The Browning BPCR is drilled and tapped for sights. Weaver bases and Burris Signature Rings to match are the hot setup, in my carefully considered opinion. The inserts for the rings can be a big help when you try for long range. I have shot mine at 500 yards with an internal adjustment scope even tho' it is now wearing a Parsons Long Scope (Malcomb style). Dale53


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9740 seconds.