ASSRA Forum › General › General Discussion › Info needed on antique scope rings.
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Info needed on antique scope rings. (Read 2780 times)
casper50
Ex Member


Info needed on antique scope rings.
Apr 5th, 2006 at 12:16pm
Print Post  
I need some information on these scope rings.  A friend gave them to me.  I've never seen anything like them.  Thanks for the help.  Casper50

[url=" (You need to Login or Register to view media files and links) (You need to Login or Register to view media files and links)[/url]

[url=" (You need to Login or Register to view media files and links) (You need to Login or Register to view media files and links)[/url]
  
Back to top
 
IP Logged
 
hst
Oldtimer
*****
Offline



Posts: 569
Joined: Jun 3rd, 2004
Re: Info needed on antique scope rings.
Reply #1 - Apr 5th, 2006 at 2:59pm
Print Post  
casper50:

Man, are those cool or what? I have never seen anything like them before and my uneducated guess would be that they are unique, gunsmith made.

It looks to be a clever design. What I take to be the rear block (the one that mounts to a block) has the ring suspended on what I wold guess to be spring temper vertical wires or small diameter pins. The front ring is suspended in  slots at 6 and 9. I assume that this is all to allow the scope to move in recoil.

Good stuff. The would look Real Good on an early target rifle restoration.  Thanks.

Glenn
  
Back to top
 
IP Logged
 
casper50
Ex Member


Re: Info needed on antique scope rings.
Reply #2 - Apr 5th, 2006 at 3:16pm
Print Post  
Thanks Glen.  The other side of the front mount is not slotted.  I don't understand how a scope would be fitted to the rear mount.  The scope would have to be a straight tube to slip through the loosened ring, but how to tighten the screw at the bottom of the ring is the problem.  I thought they were pretty cool also. My friend bought them off of Ebay in England. I haven't cleaned the old dirt and grease off of them yet.  They still have quite a bit of case color left.
  
Back to top
 
IP Logged
 
marlinguy
Ex Member
*****


Ballards may be weaker,
but they sure are neater!
Re: Info needed on antique scope rings.
Reply #3 - Apr 5th, 2006 at 11:04pm
Print Post  
I'd guess they aren't extremely old, as they would require a scope with internal adjustments, since there doesn't seem to be any elevation or windage in these mounts. That would most likely put them near WWII era.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7061 seconds.