Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic target scopes (Read 5515 times)
Bruce_P.
Ex Member


target scopes
Mar 30th, 2006 at 8:17pm
Print Post  
For a newbie seriously considering getting into the game, what would experienced shooters recommend as a good target scope to buy. 

For example;

Power of the scope?

Make?

What can I expect to spend for such equipment?

Thanks, Bruce
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4036
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: target scopes
Reply #1 - Mar 30th, 2006 at 9:15pm
Print Post  
Bruce, first welcome aboard.  As to your question, the choice is very much up to you for all but a very few types of specific matches.  The "old timers" tend to gravitate toward external adjust scopes made by Unertl, Lyman or some of the lesser known manufacturers.  Meanwhile, a lot of the current shooters are moving toward modern target scopes, especially those from Leupold and Weaver.  The old standard for offhand use was 8X, with benchresters going higher.  Nowadays the offhand guys are getting up into the 24-36 X range along with the BR boys.

For myself, I have a 15X Lyman Super TargetSpot on one offhand rifle and a Unertl BV-20 on the other and I have a 20X SuperTargetSpot on my bench gun.  My rimfire still has a little 8X TargetSpot Jr.

HTH, and again, welcome aboard!

Froggie

PS  Since all of the scopes I shoot are long discontinued, the prices are a little hard to judge.  On the other hand, the popular Weaver T-36 is usually available for about $450 or so.
  
Back to top
 
IP Logged
 
rimfire
Ex Member


Re: target scopes
Reply #2 - Mar 30th, 2006 at 9:24pm
Print Post  
Bruce - first of all it depends on whether u want an internal or external adjustment scope.  For the money in an internal adjustment scope the Weaver "T" series r hard 2 beat and of course the is always Lepould and the other Hi dollar rigs.  for a used internal that is no longer made look for a Redfield 3200.  If u r wanting to go with the external type u could try Parsons but I am not sure that he is making scopes or just serviceing them.  There are places out on the net that sell used Unertl, Lyman Super Target Spots, Fecker and 
Litcherts(sp).  And of course ther are the George Mitchel scopes but he made less than 400 so they are hard to find - dollar wise we are talking anything from $300-$1200.  If u get a good scope of proper power u will not need to invest in a spotting scope. U have a good day now - rimfire
  
Back to top
 
IP Logged
 
QuestionableMaynard8130
Frequent Elocutionist
*****
Offline



Posts: 4144
Location: Benton  Harbor MI
Joined: Apr 17th, 2004
Re: target scopes
Reply #3 - Mar 30th, 2006 at 9:25pm
Print Post  
Lots of variables to consider.  what calibre you considering.  45 cal bullet holes are a lot easier to spot than 22 or 25.  Rifle/action types can enter the calculation.  You going to use the rifle scope as your primary viewing tool or you going to use a spotting scope too?  You planning on shooting offhand, bench, or both?

How hung up are you on the-old tyme-look?  The old external adjust scopes, Lyman targetspots, Unertls etc are really cool looking, but they are also collectors items now and can cost a bunch.    some of the newer ones like the Mitchells etc are seen but  I can't even think of $$$$$ numbers that high

 However you can use a modern internal adjust scope with a simple weaver mount and do just fine.  IN that case most any decent varmint/target scope can get you started.  I started a few years ago with a discontinued Tasco . Something like a 12-24 variable from one of the Sportsman's Warehouse/Cheaper Than Dirt -kind of mail order outfits on a browning M-78 45-70.  (And frankly I have a better gun and scope now, but my scores are not all that much better---'course scope and rifle are not al the equation either)  An issue or two back Dale McGee had an article in the ASSRAJournal about using and mounting modern adjustable scopes.   Frankly just getting started, I'd go that route. At least to start with. You can always upgrade as you develop.
 At most of the EtnaGreen shoots,  used scopes show up on the trading table, usually at very reasonable prices.

now maybe some guys who really know what they are talking about will weigh in Grin
  

sacred cows make the best burger
Back to top
 
IP Logged
 
38_Cal
Frequent Elocutionist
*****
Offline



Posts: 2247
Location: Montezuma, Iowa
Joined: Apr 27th, 2005
Re: target scopes
Reply #4 - Mar 30th, 2006 at 11:46pm
Print Post  
For my Ruger No. 3 Schuetzen rifle, I use a modern internal adjustable scope, set at 8 or 10 for awful-hand, depending on how fresh my eyes are, and bump it up to 24 for bench.  On my Martini rifles I use either a Super Targetspot in 10x, Unertl in 16x or one of the older externally adjustable Tasco 6-18x scopes.  I also occasionally use a similar Tasco in 20x on the bench.   

David
Montezuma, IA
  

David Kaiser
Montezuma, IA
Back to top
 
IP Logged
 
Dale53
Oldtimer
*****
Offline



Posts: 810
Location: Southwestern Ohio
Joined: Apr 17th, 2004
Re: target scopes
Reply #5 - Mar 31st, 2006 at 1:52am
Print Post  
I have a good deal of experience with Simmons 44 magnum scopes. The 6.5x20x44mm with target knobs is a dandy choice and the best value on the planet. Natchez Shooters Supply has them for just under $100.00. I have a couple or three of them (shoot them in .22 silhouette year around) and they are completely repeatable. They actually are more reliable than a couple of Leupolds that I have. This scope, in my opinion, is a $300.00 scope for $100.00. We have a number of fellows using them at the local club and ALL are happy with them.

Moving up the dollar scale, the Weaver is the hands down "high end" champ (T-36 at about $389.00 at Natchez Shooters Supply). This is my current choice for my Schuetzen rifles.

Both are easily mounted on most any single shot. See my article in the Journal that DWS mentioned for all of the details.

Dale53

  
Back to top
 
IP Logged
 
Bruce_P.
Ex Member


Re: target scopes
Reply #6 - Mar 31st, 2006 at 8:29am
Print Post  
Thanks so much for all the information.

To begin with, I don't know much about scopes at all. I've shot muzzleloaders for fun, and competition for nearly 30 years. I've enjoyed it much.

About ten years back I got bit by the BPCR bug. The old schuetzen rifles are certainly a major part of this game. I would be more of a traditionalist.

As regards to equipment, I am shooting a CPA 44 1/2 with a #3 barrel in .38-55 at this time. It's not a true schuetzen as it is minus the hooked butt plate. It has a crescent type butt plate on a type 52 stock. No palm rest. I would like to get another CPA rifle at some time chambered for the .32-40. Perhaps more traditional with the hooked buttplate etc. Maybe a stupid question, but does the hooked buttplate, and palm rest really aid in a steadier offhand position?

The rifle's top barrel flat is tapped and drilled for scope mounts. 

I guess I've always been under the impression that the old low velocity schuetzen cartridges required a scope with external adjustments as modern scopes would not have enough adjustment range for them. I guess I'm wrong about that.

  
Back to top
 
IP Logged
 
Asst
Ex Member


Re: target scopes
Reply #7 - Mar 31st, 2006 at 8:58am
Print Post  
BP,   The hooked butt plate and the palm rest  absolutly aids in a steadier hold offhand. No if's and's or but's.

As for a scope, I was always afraid of a higher magnifacation scope for bench or offhand, but I was convinced differently.

My first medal I shot a 10 shot offhand match with a 30X STS and just told myself to keep them in the rings, and I did follow some good advice from a very good OH shooter and scored a 191 out of 250. Not the greatest score but it got me a second place medal.

I asked a fellow once why he shoots a 36X scope, his anwser,  "Because I don't have a 40X scope"
  
Back to top
 
IP Logged
 
rwjshooter
Ex Member


Re: target scopes
Reply #8 - Mar 31st, 2006 at 10:11am
Print Post  
Hi Bruce
Yes you may run out of elevation on an internal adjustment scope I did on my CPA but a set of BURRIS signeture rings will cure that with the offset inserts. welcome aboard and good shootin
ray johns
  
Back to top
 
IP Logged
 
Dale53
Oldtimer
*****
Offline



Posts: 810
Location: Southwestern Ohio
Joined: Apr 17th, 2004
Re: target scopes
Reply #9 - Mar 31st, 2006 at 12:09pm
Print Post  
One thing that may not be generally known is that the Simmons 6.5x20x44mm has extraordinary range for an internal adjustment scope.

My Weaver scope will go from 25 yards to 200 yards without problems. I absolutely agree with Ray that Burris Signature rings are the "real ticket" for handling both windage AND elevation shortcomings of rifle/scope combinations. I recommend them without reservation.

Dale53
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint