ASSRA Forum - Coil Spring Low Wall Parts Needed

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Coil Spring Low Wall Parts Needed

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Coil Spring Low Wall Parts Needed (Read 4190 times)

choken Participating Member Offline Posts: 33 Location: Nashville, TN Joined: Sep 20^th, 2004	Coil Spring Low Wall Parts Needed Jun 20^th, 2005 at 10:11am	Print Post
	Folks, I'm trying to piece together a coil spring 22 rimfire low wall. I need a hammer, breech block, extractor, firing pin and link. I have some centerfire highwall stuff to trade or will purchase. Thanks in advance for your help, Ken


	IP Logged

JDSteele Ex Member	Re: Coil Spring Low Wall Parts Needed Reply #1 - Jun 20^th, 2005 at 11:11am	Print Post
	I may have most of what you need, e-mail treeblood1 @ aol. com (lose the spaces). Is your frame the flat side or the flared side? What high wall parts do you have to trade? Regards, Joe


	IP Logged

choken Participating Member Offline Posts: 33 Location: Nashville, TN Joined: Sep 20^th, 2004	Re: Coil Spring Low Wall Parts Needed Reply #2 - Jun 20^th, 2005 at 12:16pm	Print Post
	Thanks JD. I sent you an email with details. Thanks again, Ken


	IP Logged

choken Participating Member Offline Posts: 33 Location: Nashville, TN Joined: Sep 20^th, 2004	Re: Coil Spring Low Wall Parts Needed Reply #3 - Jul 6^th, 2005 at 2:48pm	Print Post
	JD, Thanks for your help. The low wall receiver is together and might actually work (thanks to a friend that is good woth metal). It is tanged, welded, and polished. Just got a pretty Claro blank. Now all I need is about 40 hours to work on it. Thanks again, Ken


	IP Logged

JDSteele Ex Member	Re: Coil Spring Low Wall Parts Needed Reply #4 - Jul 7^th, 2005 at 12:39pm	Print Post
	Hi Ken, thanks for the report. I surely enjoy seeing an old single shot get a new lease on life, with someone who'll really appreciate shooting it. Glad I had the parts you needed. Regards, Joe


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.1264 seconds.