ASSRA Forum › General › Reloading the Single Shot Rifle › Pope style bullet luber
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Pope style bullet luber (Read 4617 times)
mrballardman
Participating Member
*
Offline



Posts: 32
Location: California
Joined: May 4th, 2005
Pope style bullet luber
May 4th, 2005 at 3:49pm
Print Post  
Any one out there making any?
  
Ed
Back to top
 
IP Logged
 
38_Cal
Frequent Elocutionist
*****
Offline



Posts: 2247
Location: Montezuma, Iowa
Joined: Apr 27th, 2005
Re: Pope style bullet luber
Reply #1 - May 4th, 2005 at 6:33pm
Print Post  
Pete Allan, Allan Foundry & Mfg., makes a brass casting that can be turned into a lube pump with a bit of time and lathe work.  Contact Pete at 10591 Nassau St. NE, Minneapolis, MN 55449, phone (763) 786-2186.

David
  
David Kaiser
Montezuma, IA
Back to top
 
IP Logged
 
PETE
Ex Member


Re: Pope style bullet luber
Reply #2 - May 4th, 2005 at 8:03pm
Print Post  
mrballardman,

  Willis Gregory, who's on here, makes one quite similar to the Pope. He'll probably contact you if he sees your message. I have one, along with a second "die" for another caliber, and like it very much.

PETE
  
Back to top
 
IP Logged
 
mrballardman
Participating Member
*
Offline



Posts: 32
Location: California
Joined: May 4th, 2005
Re: Pope style bullet luber
Reply #3 - May 5th, 2005 at 10:50am
Print Post  
Thanks for the replies.  Any phone number for mr Gregory.
  
Ed
Back to top
 
IP Logged
 
tim_s
Ex Member
*****
Re: Pope style bullet luber
Reply #4 - May 5th, 2005 at 11:12am
Print Post  
I could use that phone # as well for Mr. Gregory.
  
“ I don’t have to be faster than the bear, I just have to be faster than you”
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4062
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Pope style bullet luber
Reply #5 - May 5th, 2005 at 11:48am
Print Post  
I don't think I have Willis' number handy, but if you will send a PM to singleshot, he'll get it.  I know the design he is using for his current bullet lube pumps and like it a lot.  It is similar to the classic Pope design, but is expanded to hold a much larger lube stick so you get more bullets per fill.  In addition, the interchangeable dies (you need one for each bullet profile you are lubing) are secure, but easily changed.  I highly recommend his work.

Green Frog
  
Back to top
 
IP Logged
 
singleshot
Senior Forum Member
****
Offline


I love singleshots!

Posts: 331
Location: Fort Mill, SC
Joined: Apr 17th, 2004
Re: Pope style bullet luber
Reply #6 - May 5th, 2005 at 10:03pm
Print Post  
Better yet- email me at <singleshot@comporium.net>  I work nights and sleep days on a weird schedule!

Willis Gregory
  
Willis Gregory, aka singleshot
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1586 seconds.