ASSRA Forum › General › Reloading the Single Shot Rifle › Triple 7 for trapdoor?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Triple 7 for trapdoor? (Read 2173 times)
kaintuck
Ex Member


Triple 7 for trapdoor?
Mar 5th, 2005 at 5:35pm
Print Post  
I have just got my 1st trapdoor, an excellent condition 1888 rod bayo model. the few shots i have loaded, were triple 7 behind a lube wad and 405 PP bullet. but my bullet was sized .458 and i carrosafe'd my chamber/bore and it reads .459". I got some 4" 100yd groups, so now I want to use some cast .459" and triple 7, anybody here use this powder in their 'traps'???

Glad i can come over from the swed/swiss/marlin forums and 'get in' with the group! Grin
  
Back to top
 
IP Logged
 
PETE
Ex Member


Re: Triple 7 for trapdoor?
Reply #1 - Mar 5th, 2005 at 11:40pm
Print Post  
Kaintuck,

  Welcome to the Forum!

  Can't help you with the Triple 7, but I would recommend you size your bullets to .460". That is if you can still chamber the cartridge after loading it. Trapdoors come in a variety of bore sizes, up to some I've seen at .464", and you couldn't get a round chambered when the proper sized bullet was used. Sizing your bullets from .001" to .0015" over groove size is what most will use when shooting black or the imitations.

PETE
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9784 seconds.