ASSRA Forum › General › Reloading the Single Shot Rifle › re-de priming
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic re-de priming (Read 3642 times)
38-55
Full Member
***
Offline



Posts: 126
Location: central pa
Joined: Jul 18th, 2004
re-de priming
Dec 7th, 2004 at 12:27pm
Print Post  
I was reading in Mr.Dells book about a re-de priming tool made by Jerry Simmons.  I don,t know if they are still available and if so how to go about getting one.  Any information would be appreciated.  Thank you.
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4062
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: re-de priming
Reply #1 - Dec 7th, 2004 at 6:39pm
Print Post  
Jerry sells them direct and they may also be bought (I think) from Dixie Gun Works for more money.  Last time I looked, he was advertising in the SS Exchange, and I wouldn't be surprised if his address showed up in the SSR Journal. Failing in both of those, his address can probably be had on this board, I just don't have it handy.   

HTH, the Frog
  
Back to top
 
IP Logged
 
Asst
Ex Member


Re: re-de priming
Reply #2 - Dec 8th, 2004 at 11:09am
Print Post  
     
Jerry  Simmons
715 Middlebury St
Goshen, IN 46528-2717 
Tel.: (574) 533-8546
  
Back to top
 
IP Logged
 
38-55
Full Member
***
Offline



Posts: 126
Location: central pa
Joined: Jul 18th, 2004
Re: re-de priming
Reply #3 - Dec 8th, 2004 at 5:53pm
Print Post  
Thank you for information.  Will be adding a new item to the growing equipment supply.
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4062
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: re-de priming
Reply #4 - Dec 8th, 2004 at 9:50pm
Print Post  
38-55, I think you will like the Simmons "re- and de-" as it is usually called.  It has become the "industry standard" and it seems that each of us just has to have one or more (I have 2 and use the heck out of them.)  When you order, be aware that you must get the shell holder heads for each caliber you need from Jerry also... his unit uses a unique head that is threaded for the main body.  They work very well and actually are easier to change (for me at least) than the ones that use an RCBS-type shell holder.  Jerry makes shell holder heads for about any case you can imagine and some you probably can't!  Roll Eyes

BTW, a couple of different but also very nice designs that are possibly on the horizon but not available quite yet are a Peterson type from Dave Arawinko and a Bremer type that one of our board's active members used to make and may make again.  I shouldn't say any more about them now, but stay tuned for further details.   8)

Froggie
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5556 seconds.