ASSRA Forum - 32/40 case w/small primer pockets?

ASSRA Forum › General › Reloading the Single Shot Rifle › 32/40 case w/small primer pockets?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

32/40 case w/small primer pockets? (Read 5343 times)

GWarden Senior Forum Member Offline Posts: 317 Location: Marshalltown Iowa Joined: Apr 18^th, 2004	32/40 case w/small primer pockets? Nov 5^th, 2004 at 5:00pm	Print Post
	Can anyone give me some info on where to get some 32/40 cases made with small rifle primer pockets? Bob

	Game Warden: what boys dream of being and old men wish they could have been
	IP Logged

MIKE-T Oldtimer Offline [SHOOTCAST> Posts: 636 Location: Wexford Township Michigan Joined: Apr 16^th, 2004	Re: 32/40 case w/small primer pockets? Reply #1 - Nov 5^th, 2004 at 6:40pm	Print Post
	Bob, Take a look at rocky mountain cartridge! Here is the URL (You need to *Login* or *Register* to view media files and links); Have to say that all the brass I have purchased from RMC has been exceptional!!! MIKE-T


	IP Logged

leadball Ex Member	Re: 32/40 case w/small primer pockets? Reply #2 - Nov 5^th, 2004 at 9:43pm	Print Post
	The 30-American case has a small primer pocket, it can be formed into the 32/40 Ballard. leadball


	IP Logged

QuestionableMaynard8130 Frequent Elocutionist Offline Posts: 4144 Location: Benton Harbor MI Joined: Apr 17^th, 2004	Re: 32/40 case w/small primer pockets? Reply #3 - Nov 6^th, 2004 at 6:23pm	Print Post
	Leadball, I'm not familiar with that case, could it also be used for 38.55? I assume that the idea is that the small primer would allow for a less disruptive ignition flash//DWS

	sacred cows make the best burger
	IP Logged

DonH Ex Member	Re: 32/40 case w/small primer pockets? Reply #4 - Nov 6^th, 2004 at 8:18pm	Print Post
	Is the .30 American case still in production? I thought it was long gone. If not, I should like to acquire some.


	IP Logged

leadball Ex Member	Re: 32/40 case w/small primer pockets? Reply #5 - Nov 7^th, 2004 at 7:14pm	Print Post
	DWS8130--DonH: Federal Cartridge made quite a large run of the 30 American back in the late 70's for the benchrest shooters. I know of no place they can be bought. An old wildcatter might have some. I'm sure they could be blown-out to 38/55 Ballard. leadball


	IP Logged

joeb33050 Frequent Elocutionist Offline Posts: 2613 Location: Marathon, FL Joined: Apr 20^th, 2004	Re: 32/40 case w/small primer pockets? Reply #6 - Nov 8^th, 2004 at 6:25am	Print Post
	I know that this won't convince anyone, but. Years ago I bought a bunch of 38/55 cartridges with small primer pockets. Knowing that small primers would be way superior to Rem 2 1/2's, I tested them in 38/55, 30/30 and 32/40 after (easily) forming cases. When I moved to FL I gave them all to Clayton Prario, they never made any measurable difference. I know this won't convince anyone, but. joe b.


	IP Logged

JDSteele Ex Member	Re: 32/40 case w/small primer pockets? Reply #7 - Nov 8^th, 2004 at 7:45pm	Print Post
	Joe, I believe you without question. Several writers have reached this conclusion over the years but the results seem to vary with the cartridge case capacity and temperature. Apparently temps around freezing will result in hangfires and misfires with the larger cases using SR primers, while the accuracy differences were not readily apparent for the most part when ignition was apparently reliable. Some of these results were obtained with factory cases in both sizes (LR & SR) while others used cases with tiny sleeves in the primer pockets. This made the pockets a little deep for the SR primers & I don't remember what, if anything, was done to correct this. Wish I could say where I read this, but CRS has a firm grip these days. FWIW & ttfn, Joe


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.8806 seconds.