ASSRA Forum - Borchardt highwall or CPA action

ASSRA Forum › General › Single Shot Rifles › Borchardt highwall or CPA action

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Borchardt highwall or CPA action (Read 7881 times)

Quisto56 Ex Member	Borchardt highwall or CPA action Oct 8^th, 2004 at 7:49pm	Print Post
	Looking to get a new rifle built with the ability to change barrels I heard these actions had that ability from some makers but havent found out where to get them except the CPA. Who makes the borchardt action and what are the strengths and limitations of each action . Looking for a 348 or 45/70 and a 25 caliber based on one of these cases. Any help would be appreciated Quisto56


	IP Logged

ken_hurst Ex Member	Re: Borchardt highwall or CPA action Reply #1 - Oct 8^th, 2004 at 11:26pm	Print Post
	The Borcgardt riflr is made by "the Borchardt Rifle Co." in N.M. See his ad. in the ASSRA Journal. Ken


	IP Logged

cc_Shooter Ex Member	Re: Borchardt highwall or CPA action Reply #2 - Dec 12^th, 2004 at 1:51pm	Print Post
	I bought a CPA a couple of years ago and got it with a 348 Win and a 30/40 Krag barrel. I have since added a 38/70 Win barrel. I am happy with the setup. CC shooter.


	IP Logged

JDSteele Ex Member	Re: Borchardt highwall or CPA action Reply #3 - Dec 12^th, 2004 at 8:16pm	Print Post
	Borchardts & walls are capable of being altered to switch-bbl configuration but the makers don't make 'em that way yet. Winchester did make takedown walls originally but I don't know any maker who does so today. So I guess you're stuck with CPA or Thompson-Center or New England or............ ttfn & good luck, Joe


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.0981 seconds.