ASSRA Forum - What velocity do you shoot with your .32's?

ASSRA Forum › General › Reloading the Single Shot Rifle › What velocity do you shoot with your .32's?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 [2]

What velocity do you shoot with your .32's? (Read 10564 times)

GWarden Senior Forum Member Offline Posts: 317 Location: Marshalltown Iowa Joined: Apr 18^th, 2004	Re: What velocity do you shoot with your .32's? Reply #15 - May 26^th, 2004 at 10:32pm	Print Post
	In my CPA 32/40 with a Hoch 200gr, Rem 2 1/2 primer, Emmerts lube I'm getting 1380 over the chrono using 14.1 gr of IMR 4227. Best wall hanger target has been 5 shots at 100yds in .319". GWarden

	Game Warden: what boys dream of being and old men wish they could have been
	IP Logged

Schuetzendave Frequent Elocutionist Offline Retired Ex-Shooter Posts: 4075 Location: St. Albert, Alberta Joined: Jan 28^th, 2005	Re: What velocity do you shoot with your .32's? Reply #16 - Jan 28^th, 2005 at 9:26pm	Print Post
	Velocities for H108 or AA#9 loads in 32 Miller (1.470" .357 Max tapered with .223 die) using 20:1 lead:tin 205 grain Jones or 204 grain Barnett mold in a 14 gain twist 30" vs 25" Smith barrel: 12.4 grains 1512 fps vs 1384 fps 12.5 grains 1516 fps vs 1387 fps 12.6 grains 1531 fps vs 1403 fps 12.7 grains 1536 fps vs 1408 fps 12.8 grains 1544 fps 12.9 grains 1552 fps 13.0 grains 1566 fps 13.1 grains 1576 fps So a barrel 5 inches longer resulted in an average increase of 128 fps. Note: Pressure signs will start to show if you go over 13.1 grains.


	IP Logged

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

Page completed in 1.2313 seconds.